 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Reverse Package Top View LEDs 67-21UYOC/S530-XX/TR10 Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (12mm Tape). Pb-free. The product itself will remain within RoHS compliant version Descriptions The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the TOP View LEDs ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material AlGaInP Emitted Color Brilliant Orange Lens Color Water Clear verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 1 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Package Dimensions C L + Polarity - For reflow soldering (propose) Note : Tolerances dimension 0.1 unless otherwise noted Unit : mm verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 2 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current IFP (Duty 1/10 @1KHz) Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. 60 mA Symbol VR IF Topr Tstg ESD Pd Rating 5 25 -40 ~ +85 -40 ~ +100 2000 60 Unit V mA V mW verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 3 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Electro-Optical Characteristics (Ta=25) Parameter Symbol *Chip Rank A2 A3 A4 Luminous intensity Iv A5 A6 A7 A8 Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current 21/2 p d VF IR --------------------Min. 40 50 63 80 100 125 140 ----------------1.7 Typ. 55 83 95 123 154 215 251 120 611 605 17 2.0 ----------------2.4 10 deg nm nm nm V A IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V ----mcd IF=20mA Max. Unit Condition *67-21UYOC/S530-XX/TR10 Chip Rank verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 4 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Typical Electro-Optical Characteristics Curves verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 5 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 6 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: Tolerances Unless Dimension 0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 7 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 8 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 9 of 9 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com verlight Electronics Co., Ltd. Device No. : DSE-671-237 http://www.everlight.com Prepared date 18.Sep.2005 Rev. 2 Page: 10 of 9 Prepared by: Teresa Lee |
Price & Availability of 67-21UYOC-S530-A2-TR10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |